ow ,we will tell you how to produce the printed wrispersonalized bracelets for womentband .
If we want to produce the printed wristband ,the first step ,we will make a digital proof depends on the order information and send it to customer to confirm it .If the digital proof is not ok ,we will revised it and send it to customer again .We will satrt the mass production until the customer confirm the digital proof .The second step ,we need to prepare silica gel and use the promotional machine to produce the blank wristband and trim the edge of the blank wristband .At the same time ,we need to produce the screen printing plate out and printed the logo and message on the band surface through it .When we finished the printing process ,we will put the printed wristband in oven to bake it .When the ink is dried ,the printed wristband is finished .About the logo and message color ,we can make it with one color ,two colors ,three colors of CMYK color .By the way ,if we want to peoduce the printed wristband ,the thickness of the line of the logo need to reach 0.1 mm ,otherwise the screen printing plate can’t be produce out .
After reading this article, I believpersonalized bracelets for womene you have a general understanding of printed wristband .If you want to know more about the printed wristband ,please contact us when you feel free .
colored-rubber-bands-for-braceletscolor-filled-wristband with colors will be good choice. The band color can be solid, swirled, segmented, UV sensitive and glow in the dark. Custom silicone wristband contributes to memorials, awareness, cross-fit, team sports, holiday decoration, party favors, fundraising, company event etc. Design your own wristband is not so difficult as you can imagine. Our website is good for you.
So let me show you how to make a rubber wrsitband in a factory. There are mainly 6 steps.
1. Design the digital and get confirmation from client.
2. Make the mould for debossed and embossed style or film to printed style.
3. Prepare the material and warm up the machine. The running temperature of the machine is as high as 200 degree centigrade. It takes several hours warming up. During this period of time, we can get the color and silicone mixed.
4. To produce wristbands by the mould on the machine. Have edge cut, fill the color or printed the logo on the wristbands.
5. Quality checking. The unqualified product should be picked out.
6. Packing and delivery.